35kw Square Plastic Bottle Filling Machine Customized 5L- 10L Mineral Water Drinking

--- Introduction---

1.When the bottles straight from the chain of humanitarian sent to the first machine rinser; the machine in motion, in the Under the action of cam, so that folder open bottle clip and contraction of the bottle rotated 180 degrees for washing and disinfection.

2.Continue to operate, the bottle returned to the original point of view. And the open clip, under the influence of the bottle in the Jog Dial to enter delivery systems. Then transported to the filling machine parts, filling machine parts has a photoelectric detection, when the bottle is only through the Ba, the optical data into information to the PLC, PLC had instructed the cylinder block to block bottles .

3.Also, bottle filling machine rear cylinder block has also played, keep an empty bottle into the capping machine. Under the action of the program, filling the cylinder downward movement, so that within the filling valve into the bottle filling, until a certain time to stop filling, the cylinder block bottles back. Filled bottle into the capping machine, capping machine from the rack, the justifications for cover device, and even the composition of gland. Gland it is connected to the horizontal section of the dump under a certain angle, the constant movement when the bottle, put on caps. Then, the bottles with catchy article closely aligns with the gland, gland play a role.

4.The plastic bottle filling mchine , It adopts PLC and touch screen automatic control, and has the advantages of accurate filling, advanced structure, stable operation, low noise, large adjustment range and fast filling speed.

5.The machine was design and manufactured by Reliable, especial for liquid from thin viscous to high density liquid, such as water, oil, lotion, cream, Jam, sauce, honey, ketchup and so on. It is mostly used in the industry of chemicals, foodstuff and pharmaceuticals.

Description
(1)The 4-in-1 bottle water machine is mainly used in the pure water, mineral water filling operations. The three functions of bottle wash fill and seal are composed in one body of the machine. The whole process is automatic. The first rinsing machine is medical water rinsing machine, the second rinsing machine is purified water rinsing machine. The bottle will be cleared and sterilized after the two rinsing machine.

(2)The bottle water machine is used in filling mineral water or pure water in bottles made of polyester and plastics. The machine can also be used in hot filling if being installed with temperature controlling device. The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles.

(3)The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted. There the output and benefit of the machine is higher than the machinery of the same specifications.

(4)The advanced OMRON programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably.

(5)It is convenient to operate with higher automation because every part of the machine is inspected to run with photo electricity, on the bases, the filling parts of the machine can be changed into filling methods of lower vacuum.

(6)The filling category of lower vacuum (Z type machine) is applicable in glass bottles, filling alcohol, soy and such like materials. The aluminum theft proof cap and plastic cap can be adopted. The machine is idea-preferred equipment for beverage maker